City of Lemoore (CA)

California Authority Having Jurisdiction Solar permitting requirements

NEC Code Version2023

Fire Code Version2018 Building Code

SolarAPP+ StatusAdopted

Wet Stamps RequiredDigital Structural

Fire Setback Enforced1

Codes

NEC Code Version: 2023

Fire Code Version: 2018 Building Code

Code List

2025 CALIFORNIA BUILDING CODE

2025 CALIFORNIA ELECTRICAL CODE

2025 CALIFORNIA FIRE CODE

2025 CALIFORNIA PLUMBING CODE

2025 CALIFORNIA MECHANICAL CODE

2025 CALIFORNIA ENERGY CODE

2025 CALIFORNIA RESIDENTIAL CODE

2025 CALIFORNIA ADMINISTRATIVE CODE

ASCE Code Specification: ASCE 7-16

SolarAPP+ & submittal

SolarAPP+ Status: Adopted

Any SolarAPP+ Restrictions: 1

SolarAPP+ Restrictions: Existing Systems,Trenching

How Many Plansets Required: Other (See Submission Notes)

Revision Required: 0

Rough Inspection: None

New Planset Required For Module Swap: 0

Stamps

Ee Stamp Required On SLD: Yes

Wet Stamps Required: Digital Structural

Structural Calculations Required: Yes

Stamp Location On Plans: Unspecified

Date On Stamps: Expiration Date

Fire setbacks

Fire Setback Enforced: 1

Setback Notes: Standard

Structural & loads

Wind Speed: 110

Wind Notes: Exposure Category B

Snow Load: 0

Reducible Snow Load Allowed: 1

Max Attachment Spacing: 96

Structural Notes: SE stamps on corresponding PV pages & PE Letter / Calcs. WS 110mph. Exposure B. * 12/02/20 - City of Lemoore - Inspector / Plan checker doesn't want to approved GMA projects. Inspector will only approved pv plans with GMA if we can provide a Singed PG&E Approval Letter. He said just do an MPU. - Jess H * if installing on a patio cover, structural is required.

Minimum Ground On Roof: #10

Electrical

AC Disconnect Required: Yes

Electrical Load Calcs Required: Derates

Allowed POI: PV Breaker,Load Side Taps,Meter Adapter,Line Side Taps

Panel Schedule Required: Partial Home Backup

Temperature Rating: 90

De Rating Ampacity: 0.91

BOS Restrictions: AC Disconnect must be located within line sight of MSP and within 10' of MSP

Battery / ESS

Unique Battery Placards Needed: 1

ESS Notes: Producers storage device(s) will not cause the Host Load to exceed its normal peak demand. Normal peak demand is defined as the highest amount of power required from the Distribution System by Producers complete facilities without the influence or use of the energy storage device(s). - The customers solar generating system, including an energy storage system if installed, connected to the GMA, will have no more than a maximum rating of 14.0 kilowatts (kW) at 240 volts (V) and does not produce a total of more than 60 amps

Separate ESS Disconnect Required: ESS Disconnect

ESS Elevation Detail Required: No

Plan set

Plan Set Requirements: ll zinscos panels in Lemoore is automatic MPU. MC Please do not place mods over O'hagen vents when designing or in the CR process. This has failed inspection Please do not place mods over O'hagen vents when designing or in the CR process. This has failed inspection

Electrical Diagram: Standard

Custom Placards Required: 1

Placards Notes

SPECIAL PLACARD - AHJ REQUIRES PCS SETTING FOR ALL TESLA POWERWALL JOBS

Ground mount

Ground Mount Fencing Required: Mesh/Scrim