Village of Elk Grove Village (IL)

Illinois Authority Having Jurisdiction Solar permitting requirements

NEC Code Version2023

Fire Code Version2015 Building Code

SolarAPP+ StatusTargeted

Wet Stamps RequiredDigital Structural

Fire Setback Enforced1

Codes

NEC Code Version: 2023

Fire Code Version: 2015 Building Code

Code List

2024 INTERNATIONAL RESIDENTIAL CODE

2018 INTERNATIONAL BUILDING CODE

2018 INTERNATIONAL MECHANICAL CODE

2018 INTERNATIONAL PLUMBING CODE

2023 NATIONAL ELECTRICAL CODE

2014 ILLINOIS PLUMBING CODE

2018 INTERNATIONAL FUEL GAS CODE

2018 INTERNATIONAL ENERGY CONSERVATION CODE

2018 INTERNATIONAL PROPERTY MAINTENANCE CODE

2024 INTERNATIONAL FIRE CODE 2018 ILLINOIS ACCESSIBILITY CODE

IEBC Accepted: 1

ASCE Code Specification: ASCE 7-16

SolarAPP+ & submittal

SolarAPP+ Status: Targeted

Any SolarAPP+ Restrictions: 1

SolarAPP+ Restrictions: MPU,Derate

Revision Required: 1

New Planset Required For Module Swap: 0

Stamps

Wet Stamps Required: Digital Structural

Structural Calculations Required: Yes

Stamp Location On Plans: Unspecified

Date On Stamps: Expiration Date

Fire setbacks

Fire Setback Enforced: 1

Setback Notes: Standard

Structural & loads

Wind Speed: 115

Wind Notes: Exposure Category B

Snow Load: 30

Reducible Snow Load Allowed: 1

Max Attachment Spacing: 96

Structural Notes: Standard

Minimum Ground On Roof: #10

Electrical

Electrical Load Calcs Required: Derates

Allowed POI: Line Side Taps,Load Side Taps,Meter Adapter,PV Breaker

Panel Schedule Required: Partial Home Backup

Temperature Rating: 90

De Rating Ampacity: 1

Battery / ESS

Unique Battery Placards Needed: 0

ESS Notes: Standard

Separate ESS Disconnect Required: ESS Disconnect

ESS Elevation Detail Required: No

Plan set

Electrical Diagram

MPU:

Requires exterior disconnect and panel surge protector
Aluminum feeders must be removed and replaced with copper
Ground and bond the service per the 2023 NEC
Raceway to be IMC or rigid, and upturns to be IMC or rigid per 2023 NEC as amended by EGV.
•Emergency disconnects shall be one of the following: (1) Emergency Disconnect, Service Disconnect (2) Other listed disconnect switches or circuit breakers on the supply side of each service disconnect that are suitable for use as service equipment shall be marked “Emergency Disconnect, Not Service Equipment.”

Electrical Diagram Notes: MPU [Carbon monoxide and smoke detectors throughout the house are required to be in compliance with the 2018 IRC as amended by EGV (one on each floor, one in each bedroom - minimum of 36” away from tip of fan blade, and one within 15’ outside of bedrooms). // One hardwired detector shall be installed in the vicinity of the work and all other detectors can battery powered. // All devices shall be interconnected]

Custom Placards Required: 0

Ground mount

Ground Mount Fencing Required: Mesh/Scrim