Borough of Monmouth Beach (Monmouth County) (NJ)

New Jersey Authority Having Jurisdiction Solar permitting requirements

NEC Code Version2020

Fire Code Version2018 Building Code

Wet Stamps RequiredWet Structural

Fire Setback Enforced1

Codes

NEC Code Version: 2020

Fire Code Version: 2018 Building Code

Code List

2021 INTERNATIONAL BUILDING CODE

2021 INTERNATIONAL RESIDENTIAL CODE

2021 INTERNATIONAL FIRE CODE

2021 INTERNATIONAL ENERGY CONSERVATION CODE

2021 INTERNATIONAL EXISTING BUILDING CODE

2021 INTERNATIONAL FUEL GAS CODE

2021 INTERNATIONAL MECHANICAL CODE

2021 INTERNATIONAL PLUMBING CODE

2020 NATIONAL ELECTRICAL CODE

ASCE Code Specification: ASCE 7-16

SolarAPP+ & submittal

How Many Plansets Required: 3

Revision Required: 0

New Planset Required For Module Swap: 0

Stamps

Ee Stamp Required On SLD: No

Wet Stamps Required: Wet Structural

Structural Calculations Required: Yes

Stamp Location On Plans: Unspecified

Date On Stamps: Expiration Date

Fire setbacks

Fire Setback Enforced: 1

Setback Notes: Standard

Structural & loads

Wind Speed: 115

Wind Notes: Exposure Category B

Snow Load: 20

Reducible Snow Load Allowed: 1

Max Attachment Spacing: 96

Minimum Ground On Roof: #10

Electrical

Electrical Load Calcs Required: Derates

Allowed POI: Meter Adapter,PV Breaker,Line Side Taps,Load Side Taps

Panel Schedule Required: Partial Home Backup

Temperature Rating: 90

De Rating Ampacity: 0.91

Battery / ESS

Unique Battery Placards Needed: 0

ESS Notes: Standard

Separate ESS Disconnect Required: ESS Disconnect

ESS Elevation Detail Required: No

Plan set

Plan Set Requirements: Modifications: As you may know, field modifications are routinely made during the course of construction. Please be advised that amended zoning approval must be obtained prior to any field modifications or additional work to confirm that the proposed modifications do not violate any Borough Ordinances. There have been a number of recent issues related to field modifications that were made without prior zoning approval that violated the Borough Ordinances. This delayed the issuance of a TCO/CO/CA since residents and/or contractors had to go the Planning Board for a variance from the applicable section of the Ordinance or modify the project to comply. Therefore, please review any field modifications with the Zoning Office and obtain the necessary amended zoning approval to confirm that the changes conform to the ordinances and prevent unnecessary delays and expenses. See link below for further details.

Electrical Diagram: If lineside tap (LST), then a Hoffman Tap Box (junction box) is required.

Electrical Diagram Notes

Custom Placards Required: 0

Ground mount

Ground Mount Fencing Required: Mesh/Scrim