City of Newberry (SC)

Net metering & export

Post Solar Billing Method

Export Rate

Net Excess Generation Notes

"Exported usage is counted on an hourly basis and credited at either the on- or off-peak hourly rates.

In the event that a given monthly credit for excess customer-owned renewable generation exceeds the total billed amount for Customer’s consumption in any corresponding month, then the excess credit shall be applied to the subsequent month’s bill. Excess energy credits so produced shall accumulate and be used to offset Customer’s energy consumption bill for a period of not more than twelve (12) months. At the end of each calendar year, unused excess credits shall be paid by Utility to the Customer.

Metering shall be performed by a single meter capable of registering the flow of electricity in two directions (delivered and received) to determine the customers' net energy consumption."

Rebates Offered

0

Deregulated

0

Allows Standby

1

Interconnection & taps

Approval Req To Install

Yes

Interconnection Level

3

Supply Side Taps Allowed

0

Line Taps Allowed

0

Load Taps Allowed

0

Automatic Transformer Upgrade Size

0

System size & offset

System Size Restrictions

25

System Size Restriction Type

AC kW

System Size Battery Included

0

System Size Includes Existing Systems

0

Offset Type

No Restrictions

Offset Value

0

Offset Calculation Period

0

Industry Standard Watts Sqft

2

System Offset Notes

25kW max residential, 100% of contracted load or 1,000kW max- non-residential

Metering & disconnect

Production Meter Required

No

Production Meter Position

N/A

Production Meter Labeling

N/A

Plans & docs

Install Reqs

Customer shall install a manual disconnect switch of the visible load break type to provide a separation point between the AC power output of the CRG system and any Customer wiring connected to Utility’s electric system such that back feed from the CRG system to Utility’s electric system cannot occur when the switch is in the open position. The manual disconnect switch shall be mounted separate from the meter socket on an exterior surface adjacent to the meter. The switch shall be readily accessible to Utility and capable of being locked in the open position with a Utility padlock. When locked and tagged in the open position by Utility, this switch will be under the control of Utility.

Equipment Approvals

California Energy Commission

Website

link

Phone

(803) 321-1018

Other details

Restrict Inspection

0

Revision Required

1

Mod Swap Requires Planset

1

Address ID

603465

Express Planset Eligible

Yes